|
MX-5 hoods
If you want to fit
the hood yourself, please go to our "shop online" page to see our great offers.
REMEMBER- All our prices include fitting almost anywhere in N W England & W Yorks* and INCLUDE VAT. * please see our "areas we cover" page
ALL OUR HOODS WILL FIT THE MARK1 AND MARK2 (1990-2005)
MX-5 & EUNOS
IMPORTANT: Our fitted price includes:
Removing the frame from the car.
We then remove any rust,lubricate the joints, clean and polish it. Most companies do not do this. They
leave the frame on the car because it is quicker to fit, but this is not good practice and a thorough job cannot be acheived.
We also clear the drainage channels, clean and repair the rain rail and check the hood cables.
|
|
BUDGET HOOD (Will fit ALL MX5 and Eunos models) Original equipment vinyl hood with non-original zipped plastic rear window. This maybe our lowest priced hood, but it is made to the same exacting standards as all our other hoods. Original
specification cabrio vinyl is used, the seams are stitched AND welded for added strength, unlike some of our competitors offerings.
It has a zipped plastic rear window and gutters above the doors to channel the rain away so you don't
get soaked getting out of the car. We feel this hood is the best quality hood you can get for the money.
Also available in TAN ,BLUE,
BURGUNDY and GREEN for £275.00
Including
VAT
|
|
|
ORIGINAL STYLE HOOD (Will fit ALL MX5 and Eunos models) Original eqipment vinyl hood with original style zipped plastic rear window.
This hood is made as close to the original design as possible.
Using only the finest original specification cabrio vinyl, it is manufactured to a very high standard with the original
style zipped rear plastic window and double skinned rear section. If you want to keep the original look of your
mark 1 MX-5 then look no further. Excellent quality at an unbeatable price.
Only available in BLACK
Including VAT
|
|
|
ORIGINAL SPEC. VINYL HOOD WITH GLASS HEATED REAR WINDOW (will fit ALL MX5 and
Eunos models)
Using only the finest original specification cabrio vinyl, it is manufactured to a very high standard with a glass heated
rear window and gutters sewn in to the hood above the doors to channel the rain away, so you don't get soaked
getting out of the car. The hood does NOT have the seams running down each side of the roof, and so
eliminates any concern about the hood splitting around the seams as it gets older.
Also available
in TAN, BLUE, BURGUNDY and GREEN
for £380.00
Including VAT
|
|
|
MOHAIR HOOD WITH ZIPPED PLASTIC REAR WINDOW (Will fit ALL MX5 and Eunos models) Made from luxury mohair with a zipped plastic rear window. Mohair is used by prestige car makers like Porsche, BMW and Mercedes. An excellent qualty hood. This
hood is based on the original style mark 1 design with seams running along each side of the roof but has the
zip running around 3/4 of the plastic window.
There are 2 main types of mohair on the market - stayfast and twilfast.
Stayfast is the thinner, cheaper alternative. We only use the finest TWILFAST,which is more hardwearing and won't
sag like stayfast can.
Shear luxury at an affordable price.
Also available in TAN,
BLUE, GREEN and WINE RED for £370.00.
Including VAT
|
|
|
MOHAIR HOOD WITH GLASS HEATED REAR WINDOW (Will fit ALL MX5 and Eunos models) If you want the best available, then this is the hood for you.
Mohair is used by prestige car makers like Porsche, BMW and Mercedes. An excellent qualty hood. This
hood has no seams running along the roof and so eliminates the possibility of water ingress through the seams
as the hood gets older. It also has gutters sewn in above the doors to prevent water dripping onto the seats.
We believe
this is the best hood available for the MX5.
There are 2 main types of mohair on the market - stayfast and twilfast.
Stayfast is the thinner, cheaper alternative. We only use the finest TWILFAST, more hardwearing and won't sag like stayfast
can.
Shear luxury at an affordable price.
Also available in TAN,
BLUE, GREEN and WINE RED for £465.00.
Including VAT
|
There is a wide variety of materials available on the market with
varying degrees of quality but whatever material you choose, if you buy it from us you can be sure it is the finest available. Heavy Duty (HD) Vinyl This is a popular budget material used by lots of companies. It is thinner and less hardwearing
than cabriolet vinyl and has a grain that resembles that of cracked leather. It has a life expectancy of 3 to 5
years.
WE DO NOT USE THIS MATERIAL IN ANY OF OUR HOODS.
Cabriolet (CV) Vinyl This
is used by manufacturers like Mazda, Ford, Volkswagen and Toyota. If your modern convertible had a vinyl top originally,
it would probably have been made of this. A high quality material with a life expectancy of 7 to 10 years and has
a doppled effect grain.
ALL OUR VINYL HOODS ARE MADE FROM THIS MATERIAL.
Stayfast Mohair This is a cheaper, thinner alternative to twilfast mohair. Please be aware alot of suppliers
will sell this as mohair. When comparing prices make sure you are comparing like for like.
It is a hardwearing material
but is not as good as twilfast. To tell the two apart, stayfast has the same pattern, front and back. Twilfast has a herringbone
design on the reverse side.
WE DON'T USE STAYFAST.
Twilfast Mohair This is a
superior quality canvas type material, as used by luxury car manufacturers like BMW, Mercedes and Porsche.This is the finest
material there is. This material can last 15+ years. Available in black,
blue, red, green and tan. ALL OUR MX5 MOHAIR HOODS ARE MADE FROM THIS MATERIAL.
|
